Pump

NEVER BE WITHOUT A PUMP

The pump is held on at four points so it can't move about, shake or come loose. Its held at the handle, at the gauge and the head by hook n loop, which you apply to the frame and to the pump. The belt strap make contact point 4, it pulls it tight against the pads, not against the bike frame. The pump should not touch the frame directly.

The strap comes in three sizes to fit the down tube of your bike and large size can fit E-bikes. To select a size measure the circumference of your bike's down tube. The strap and pads are adaptable to work with any common pump similar to that in photo. If your pump does not have a gauge then apply the hook n loop to the body on the pump head.